JBL JRX112M Speaker

JBL JRX112M Features:

• JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• Ferro-fluid cooled compression driver with titanium diaphragm improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles are used.
• Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.

Specifications:

• Power Rating : 250 W / 1000 W
• Frequency Range : 60 Hz - 16 kHz (-10 dB)
• Dimensions (H x W x D) : 572 mm x 394 mm x 318 mm (22.5 in x 15.5 in x 12.5 in)
• Frequency Response : 70 Hz - 12 kHz (±3 dB)
• Nominal Impedance : 8 ohms
• Sensitivity : 99 dB SPL (w/1m)
• Recommended Amplifier Power : 250 W to 500 W into 8 ohms
• Maximum SPL : 129 dB
• Nominal Dispersion : 90º x 50º
• Crossover Frequency : 1.8 kHz
• Weight : 19.5 kg (43 lb)
• High Frequency Driver : JBL 2412 1 in exit compression driver mounted on Progressive Transition™ Waveguide
• Low Frequency Driver : JBL M112-8
• Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel