Furman HRM-16 Audio Distribution System

HEADPHONE/AUDIO DISTRIBUTION SYSTEM AND REMOTE MIXER MIXING STATION

Furman introduces an enlarged and enhanced system, the HDS-16/HRM-16 Headphone/Audio Distribution System.

The HDS-16/HRM-16 Headphone/Audio Distribution System cleanly routes 8 mono and 4 stereo signals to remote mixing locations via Centronics 50 pin cables. Up to eight HRM-16's can be connected directly or daisy chained to a single HDS-16, allowing as many as sixteen users (two per each HRM-16) to customize eight different mixes. A unique talkback system allows each user to communicate with other users and the main mixing location. Additionally, a SOLO system allows the engineer to mute all but one stereo send from the mix location.

The double rack-space HDS-16 provides full patching functions on its front panel via 1/4" and TT input jacks, and is intended to be installed at the mixing console location. The HDS-16 provides power and signal conditioning to drive the HRM-16 Remote Mixers. There is no power cord or wall wart required for the HRM-16's.

The HDS-16 and HRM-16 are sold separately.

OPTIONS

• Model HDS-16E: "E" suffix version is for use in countries with 220/240 VAC mains. Since HRM-16 units derive their power from the HDS-16, no special HRM-16 model is needed.

OPTIONAL ACCESSORIES

• HRM-CABL: Replacement 25 foot (7.7m) Centronics cable for linking or daisy-chaining HRM-16's, or for extending existing cables.
• HRM-16EX: Extension adapter which allows two HRM-CABLs to be joined together to create extended cable lengths. Up to eight HRM-CABLs may be joined, making a total length of up to 200 feet (62m), using one HRM-16EX adapter per cable segment (see Cable Specifications below).
• HRM-THRU: Wallmount kit consisting of two Centronics connectors linked with an 18 inch flat cable. Includes two wall plates and gaskets.
• HRM-RAW: Raw HRM-16 cable, priced per foot, for those desiring to make their own cables in exact, custom lengths.
• HRM-CONN: Cable-mount Centronics connector, for making custom cables.

Features

• Every artist in the studio or on stage can have a custom headphone/monitor mix without any adjustments at the board
• Perfect for tracking, overdubbing, rehearsal sessions, and onstage monitor mixing
• HDS-16 rackmount distribution system connects to the studio console and routes 8 mono and 4 stereo signals to HRM-16 remote mixing stations via a single multi-pair cable
• The HRM-16 Remote Mixer may either attach to a mic stand or be set on a shelf or table, allowing headphone/monitor mixes to be created on the fly
• Talkback system allows each HRM-16 mixer user to communicate with other users and the main mixing location
• One 25 foot (7.7m) HDS-16 to HRM-16 linking cable is included with each HRM-16 unit, eliminating the need for a costly "console snake"
• HDS-16 provides ultra low distortion (less than .002%), low crosstalk, high dynamic range (greater than 105 dB) drive for the HRM-16's
• All inputs are balanced; line outputs are balanced or single ended
• Three year limited warranty