CAD M179 Microphone

Similar to the M177 except with an adjustable Polar Pattern, the CAD M179 features a dual sided, externally biased capsule with a gold sputtered 1.1" diaphragm. The M179 has a high speed, low noise operational amplifier head amp, coupled with a new discrete high efficiency power supply circuit.

Specifications

Type:
Side Address, External bias condenser

Frequency Response:
10-20 kHz

Polar Pattern:
Variable

Impedance:
Low (200 ohms nominal).

Open Circuit Voltage:
-56 dB (0 dB = 1 volt per microbar).
15.9 mV/Pascal.

Dynamic Range:
133 dB.

Equivalent Noise Level:
11 dB Equivalent SPL, A weighted

Maximum SPL:
143 dB SPL (With pad on)

Total Harmonic Distortion:
Less than 0.15%

Powering:
Minimum Requirements are 24, 48 Volt Phantom Power capable of delivering at least 8 mA.

Connector:
Three pin male XLR type.