Australian Monitor AMIS26 Amplifier

The Australian Monitor AMIS26 is a high quality 2 input, 6 output distribution amplifier. The AMIS26 provides a low noise, feature packed, signal routing solution to cover a wide range of installation needs, at a contractor friendly price.

The AMIS26's 2 inputs can be balanced or unbalanced and each input's sensitivity can be switched between Mic and Line level. Each of the AMIS26's inputs is individually assignable to any of the 6 outputs via front panel DIP switches.

The 6 outputs can again be balanced or unbalanced and feature up to -60dB of attenuation so they can be run as any combination of line level or mic level outputs.

Australian Monitor AMIS26 Specifications

• Power Input 24 VDC (regulated); 12VA max.
• Output Mic/Line Switch 28dB
• Noise -89dB
• Frequency Response (0dB/-3dB) 10Hz - 50kHz
• Total Harmonic Distortion Line In (XLR/RCA) 0.02%; Mic In (XLR) 0.1%
• Crosstalk Better than 80dB
• Phantom Power 24VDC
• Input Sensitivity Line (XLR) 775mV (0dB); Mic (XLR) 10mV (-37dB); Line (RCA) 775mV (0dB)
• Dimensions 44.0 x 482.0 x 168.0 (H x W x D) mm
• Weight Net 2.5 kg (5.5 lb), Shipping 3.0 kg (6.6 lb)
• All measurements done with levels set In/Out at 0dB;
• All measurements referenced to 0dBu (0.775mV)