Australian Monitor AMIS120P Amplifier

The Australian Monitor AMIS120P is a 120 watt power amplifier with outputs for 4 and 8 ohms and 70 volt line. It may be desk or rack mounted. The AMIS120P features a flat screwdriver accessible gain control on the rear panel. This amplifier features a status LED.

The AMIS120P features a balanced line level XLR input with a parallel output to feed additional power amplifiers. Internal current limiting protects the amplifier from both overload and overdrive conditions.

AMIS120P Specifications

• Power Output 120 Watts RMS
• Maximum Load 40 Ohms @ 70 Volts
• Power Bandwidth 60Hz - 17kHz (- 3dB)
• Frequency Response 60Hz - 23kHz (- 3dB)
• Total Harmonic Distortion 0.5% @ 1kHz rated power
• Signal To Noise Ratio -80dB
• Input Sensitivity 700mV
• Outputs 70V, 4 Ohm, 8 Ohm
• Controls One gain control on rear of the unit via flathead screwdriver control
• Indicators Power "on" LED
• Power Source 120VAC 60Hz 3 pin IEC connector; 24VDC
• Power Consumption 300 Watts
• Protection Current Limiter protection, plus AC and DC fuses
• Dimensions/Weight 3.5" H x 19" W x 11" D (Chassis Dimensions only). 26.5lb
• Rack Mounting Standard