Australian Monitor AMIS1202P Amplifier

The Australian Monitor AMIS1202P is a dual channel 120W + 120W power amplifier designed to deliver continuous full range performance in a compact and reliable package. The AMIS1202P is two independent amplifiers in the one chassis making it the perfect choice for multi-zone or multi-channel applications.

The AMIS1202P provides dual balanced XLR inputs (male and female) per channel. These two inputs are wired in parallel enabling a line level 'split' to be taken from the second input of each channel. 70 volt line and 4/8 ohm outputs are available via the rear panel barrier strip.

The AMIS1202P features 'slow start' and dual AC and DC fuse protection. Also featured is automatic speaker protection. The AMIS1202P includes generous heat sinking for reliable operation in even the most extreme conditions.

AMIS1202P Specifications

• Power Output 120 Watts per channel
• Maximum Load 40 Ohms on 70 Volt line setting
• Frequency Response 60Hz - 23kHz (- 3dB)
• Total Harmonic Distortion 0.5% at 1kHz (1 Watt - full power)
• Signal To Noise Ratio -80dB at 70V; -80dB at 8 Ohms; -80dB at 4 Ohms
• Input Sensitivity 0.5 Volt RMS - 70 Volt line
• Input Impedance 10K Ohms
• Input Connection Active balanced input with male and female 3 pin XLR input/output sockets per channel.
• Outputs 70 Volt line and 4/8 Ohm via rear panel barrier strip. Line out to feed additional amplifiers from one of the paralleled XLR input sockets
• Controls Front panel power switch; Recessed rear panel input attenuator (per channel)
• Metering/Indicators Signal-present LED per channel
• Power Source 120VAC 60Hz 3 pin IEC connector; 24VDC
• Power Consumption 400 Watts (maximum)
• Protection Fuses for overload and short circuit protection, High temperature trip (disconnects load at 120¼C), DC Output Sensing (disconnects load if DC is present)
• Dimensions/Weight 3.5" H x 19" W x 11" D (Chassis dimensions only). 33.1lb
• Rack Mounting Standard