Shure PG81 Microphone

The Shure PG81 is a sensitive, flat response microphone ideal for use with acoustic instruments. Comes with 15' cable. (XLR to XLR)

Free Ground Shipping!
List Price: $161.00
Sale Price: $129.00

The Shure PG81 Includes 5.75m (15 ft) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, Storage Bag, AA Battery

FEATURES

  • Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
  • Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
  • Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
  • Powered by AA battery or phantom power supply.
  • Internal shock mount for reduced handling noise.
  • Durable metal construction.
  • On/off switch for onstage control.

SPECIFICATIONS

  • Microphone Type
    Condenser (electret bias)
  • Polar Pattern
    Cardioid (unidirectional), symmetrical about axis
  • Frequency Response
    40 to 18,000 Hz
  • Polarity
    Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
  • Output Impedance (at 1000 Hz)
    600 ohms
  • Sensitivity (at 1000 Hz)
    -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
  • Electromagnetic Hum Sensitivity
    -7 dB equivalent SPL in a 1 millioersted field (60 Hz)
  • Switch
    Built-in On/Off switch
  • Recommended Input Load Impedance
    800 ohms minimum
  • Output Clipping Level (1 kHz, 1 % THD)
    2000 ohm load
    13 dBV (0.22 V) (phantom)
    -17 dBV (0.14 V) (battery)
  • Maximum SPL
    2000 ohm load: 131 dB (phantom), 127 dB (battery)
  • Self-Noise (Equivalent SPL)
    20 dB typical, A-weighted
  • Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level)
    111 dB (phantom); 107 dB (battery)
  • Signal-to-Noise Ratio
    68 dB (IEC 651)* at 94 dB SPL
  • Power
    Phantom Power
    Supply Voltage: 11 to 52 Vdc
    Current Drain: 2.0 mA max at 52 Vdc
    Maximum Exteral Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc
    Reverse polarity protected to: 100 Vdc
  • Battery Power
    Recommended: 1.5 V alkaline AA size (NEDA 15A)
    Life: up to 10,000 hours
  • Connector
    Three pin professional audio connector (male XLR type)
  • Case
    Steel and brass construction with black painted finish
  • Environmental Conditions
    This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.
  • Weight
    Net: 250 g (8.8 oz) less battery