Mixer Amplifier Classic Series
The Classic Series C10 and C20 are rated at 10 and 20 watts respectively. Both models are available with a music on hold output (Models C10MOH & C20MOH).
The amplifiers mix 3 inputs: 2 Mic and Tel, or 1 Mic, 1 Aux and Tel. A second telephone input can be added using an accessory transformer. A built-in circuit provides microphone precedence over the Aux channel when a customer-supplied SPST switch is actuated. The Tel input is signal activated and automatically mutes the Aux channel during a page.
Each input has its own volume control; a treble control is included to adjust
the tonal balance of the output. The Tel channel includes screwdriver adjustable
mute theshold (VOX) and volume controls.
Balanced and unbalanced outputs are provided for 4, 8, and 16 speaker systems
and for 25 volt and 70 volt constant voltage systems. The C10MOH and C20MOH
versions include a Music-On-Hold output from the Aux input source. The input is
unaffected by paging. Two output taps are provided: 600 @ 1 volt or 8 @ 1 watt.
Screw terminals are used for all connections. The output includes a screwdriver
adjustable level control on the rear panel.
Thermal and electrical protection is built in and is designed to protect the amplifier against abnormal heat build-up and short circuited or overloaded outputs.
Features
The Bogen Classic Series Models C10, C20, C10MOH, and C20MOH offer dependable performance and flexibility. The C10 and C10MOH are rated at 10 watts. The C20 and C20MOH are rated at 20 watts. All models are UL and CSA listed. The MOH models provide a music-on-hold output from the Aux input source.This output is unaffected by paging. Screw terminal connections are provided for 600 @ 1 volt and 8 at 1 watt. A level control is also provided on the rear panel. The Classic Series is designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages.